| 12.8. CP helicopter swashplate setup part 2 - collective pitch setup | ||
|---|---|---|
 | Chapter 12. Helicopter and Transmitter Setup |  |
| 12.8. CP helicopter swashplate setup part 2 - collective pitch setup | ||
|---|---|---|
| | Chapter 12. Helicopter and Transmitter Setup | |
Place the pitch gauge on the helicopter main rotor blades following the pitch gauge directions.
Adjust the pitch curve on the transmitter so the main blade pitch goes from:
microhelis: 0 - 12 degrees
non-micros: 0 - 10 degrees
Some micro helis need about 10 degrees of pitch to lift off;in this case, raise the maximum pitch to about 15 degrees.
| |  | |
| 12.7. CP helicopter swashplate setup part 1 - servo setup |  | 12.9. CP helicopter swashplate setup part 3 - cyclic setup |